Close Sidebar
@RasHeliGod. Oh I mean @CrashHeliGod was the victor today in a hotly contested battle with my TREX 500 trying to recover from 2 dumb thumb inverted moves at only 2 moves high instead of 3.
Damage doest look too bad. Main Blades and Tail Boom and Torque Tube.
Thanks Crash.
Heligods - The International RC Helicopter Forum
Learn to Fly 3d RC Helicopters
Info
Crash Report
So ... i put in the mini p on the weekend.. HARD !
Mini P 450 stretch , scorp motor, 6s
Damage:
Both frames, boom, main shaft, feathering shaft, tails shaft, tails hub, tail grips, tail blades and main blades , belt, snapped head bolt and main bolt, skids cracked, canopy cracked, main plastic support where the gyro mounts onto , one blade grip and bearings. Something chewed into the tail servo lead and one cyclic servo gear set is now a bit crunchy.. Lost the tail push rod thing that keeps it centered and also tail servo arm, as well as a link.. not to mention the boom supports metal...
Mini P 450 stretch , scorp motor, 6s
Damage:
Both frames, boom, main shaft, feathering shaft, tails shaft, tails hub, tail grips, tail blades and main blades , belt, snapped head bolt and main bolt, skids cracked, canopy cracked, main plastic support where the gyro mounts onto , one blade grip and bearings. Something chewed into the tail servo lead and one cyclic servo gear set is now a bit crunchy.. Lost the tail push rod thing that keeps it centered and also tail servo arm, as well as a link.. not to mention the boom supports metal...
Looking for some guidance.
Put my TREX 500 PRO DFC in on the weekend and need a few bits. Main blades are one if them. So I thought why not try the Zeal blades. My question is around size.
The TREX manual states main blades to be 325mm and tail blades to be 70mm. Looking at a LHS web site the Zeals seem to come in length 330mm and 72mm respectively.
I am assuming that a 5mm and 2mm difference won't be a problem. The blades are quite a bit lighter (nearly half).
My questions for the HeliGods;
1. How do I understand the impact of blade length and weight on a setup?
2. How does the...
Put my TREX 500 PRO DFC in on the weekend and need a few bits. Main blades are one if them. So I thought why not try the Zeal blades. My question is around size.
The TREX manual states main blades to be 325mm and tail blades to be 70mm. Looking at a LHS web site the Zeals seem to come in length 330mm and 72mm respectively.
I am assuming that a 5mm and 2mm difference won't be a problem. The blades are quite a bit lighter (nearly half).
My questions for the HeliGods;
1. How do I understand the impact of blade length and weight on a setup?
2. How does the...
Found, Thanks
Single Align Ds 615 Servo Working
Hi guys,
let me know if you've got one
regards
argy
0448103512
let me know if you've got one
regards
argy
0448103512
For Sale: AU
Robird G31
I have 2 x brand new sealed and unopened G31's, $70 each.
Also have 2 x used and opened, with latest firmware $55 each. Local pickup in Perth (osborne park area) would be preferred, but will mail.
Also have 2 x used and opened, with latest firmware $55 each. Local pickup in Perth (osborne park area) would be preferred, but will mail.
Thats right! Heligods are holding an End Of Year FUNFLY! There will be Vendors, food, and lots of funfly to be had for everyone! Keep this date free as we celebrate 2014 and smak some heli butt!
There will be a pilots draw which costs $10.00 to enter and qualifies you to fly. The pilots draw will be a random draw and consist of prizes provided by vendors which will soon be announced. So come on down and join in the fun!
We cant wait to see you down there.
Gates open from 10am to 4pm ish...
There will be a pilots draw which costs $10.00 to enter and qualifies you to fly. The pilots draw will be a random draw and consist of prizes provided by vendors which will soon be announced. So come on down and join in the fun!
We cant wait to see you down there.
Gates open from 10am to 4pm ish...
@RasHeliGod. Oh I mean @CrashHeliGod was the victor today in a hotly contested battle with my TREX 500 trying to recover from 2 dumb thumb inverted moves at only 2 moves high instead of 3.
Damage doest look too bad. Main Blades and Tail Boom and Torque Tube.
Thanks Crash.
What do you guys think. I currently fly electrics. Was thinking about Nitro. Just because, no other reason.
My question is should a person who is not that mechanically minded (motor wise) consider a Nitro heli?
What different skills and tools are required to build and maintain a nitro?
What are the pros and cons of Nitro vs Elec?
Interested in people's thoughts and experiences.
My question is should a person who is not that mechanically minded (motor wise) consider a Nitro heli?
What different skills and tools are required to build and maintain a nitro?
What are the pros and cons of Nitro vs Elec?
Interested in people's thoughts and experiences.
Wanted: USA
Futaba Transmitter
Looking to switch to Futaba...
Anyone who may be planning an upgrade should hit me up to get rid of your old one. Just not Ancient please, LoL
Bare minimum with FASST
Anyone who may be planning an upgrade should hit me up to get rid of your old one. Just not Ancient please, LoL
Bare minimum with FASST
Page 626 of 778
XenPorta 2 PRO
© Jason Axelrod from 8WAYRUN.COM
test