Close Sidebar
Heligods - The International RC Helicopter Forum
Learn to Fly 3d RC Helicopters
Ahhh yes, Christmas is the time for giving! Happy Christmas @3dmick. BE WARNED, EXPLETIVE LANGUAGE!!!!
Hi guys welcome to the Evolution build thread brought to you by AleeS Inc, AleeS Helicopters Australia and www.yourhobby.com.au
First and foremost I'd like to thank Jeff Bradley, Scott Gentry (AleeSUSA), Kevin Williams (AleeSUSA) and Charlie Stephens (the man himself) for getting these fine machines into Australia they have worked very very hard to get them into our hands.
Over the next few nights myself and @simon will be building and updateing this thread.
The components i will be using are as follows.
Rush 750 Evolution...
First and foremost I'd like to thank Jeff Bradley, Scott Gentry (AleeSUSA), Kevin Williams (AleeSUSA) and Charlie Stephens (the man himself) for getting these fine machines into Australia they have worked very very hard to get them into our hands.
Over the next few nights myself and @simon will be building and updateing this thread.
The components i will be using are as follows.
Rush 750 Evolution...
Thunder Tiger Raptor 50 620mm Carbon V2 Main Rotor Blades, 620's .. New in packet
$25 , Pickup Melbourne, Down Frankston way or $45 inc delivery.
$25 , Pickup Melbourne, Down Frankston way or $45 inc delivery.
Used for 3 flights.. so pretty much new in plastic packet. $30 Pickup from Melbourne (Down Frankston way) $45 Posted
DX7, MODE 2 ... Gimbals feel good, has had a new lipo put in it about 1 month ago .
It had the plastic protector on the screen and after many year of being on there i pulled it off, that was a mistake as now it has like a glue residue on the screen, Still very readable.., You just peel the old one off and put the new one on, very easy and very cheap fix, $15 tops... and it's like new.
Apart from that it's in good nick, all the switches are ok and like i said it has a new lipo, most importantly the gimbals are all ok and in good working order..
I'd say seeing you need to Spend about $15...
It had the plastic protector on the screen and after many year of being on there i pulled it off, that was a mistake as now it has like a glue residue on the screen, Still very readable.., You just peel the old one off and put the new one on, very easy and very cheap fix, $15 tops... and it's like new.
Apart from that it's in good nick, all the switches are ok and like i said it has a new lipo, most importantly the gimbals are all ok and in good working order..
I'd say seeing you need to Spend about $15...
Howdy,
Up for sale , Hyperion 720i Duo3 with MaxAmps 24 volt, 1150w Power supply and hard case, No charging leads. Perfect working order.
$300 Pick up Only .. Melbourne, (Down franskton way )
Up for sale , Hyperion 720i Duo3 with MaxAmps 24 volt, 1150w Power supply and hard case, No charging leads. Perfect working order.
$300 Pick up Only .. Melbourne, (Down franskton way )
Club Info
Generator
Hi all,
The generator is down again. Two PETROL generators have been left in the container for members to use. Please be aware of the limitations of whichever gennie you use before you start charging. One is 2kva, while the red one is 3.6 kva.
To work out the loading take note of Dennis' words of wisdom:
"To work out the Watts or kVA you are drawing multiply your pack voltage by your charge current. So a 6s pack charged is around 25v so if you charge at 10 amps (2C for a 5000mah) it is 250W but you need to add a bit for the charger and PS inefficiency. So add about 20% and we get 300W...
The generator is down again. Two PETROL generators have been left in the container for members to use. Please be aware of the limitations of whichever gennie you use before you start charging. One is 2kva, while the red one is 3.6 kva.
To work out the loading take note of Dennis' words of wisdom:
"To work out the Watts or kVA you are drawing multiply your pack voltage by your charge current. So a 6s pack charged is around 25v so if you charge at 10 amps (2C for a 5000mah) it is 250W but you need to add a bit for the charger and PS inefficiency. So add about 20% and we get 300W...
News has just come to pass that our longtime serving member Jason Griffin suddenly passed away on Saturday Night (20th Dec). We all know that Jason Griffin had a passion for all things RC heli related and was a long time editor/publisher of the MRCHC distribution newsletter and was also a longtime employee of Arkrc.
We express sincere condolences on the passing of Jason. It was an honor to have known him and he will be sadly missed by many in the RC community.
RIP Jason Griffin.
We express sincere condolences on the passing of Jason. It was an honor to have known him and he will be sadly missed by many in the RC community.
RIP Jason Griffin.
So, what do you pilots think about that ? another new style Canopy/Boom for the Gaui X7 Reported by: Paul Demmer
Continue reading...
Continue reading...
Page 571 of 774
New Posts
Loading...
XenPorta 2 PRO
© Jason Axelrod from 8WAYRUN.COM
test
