Notice Rc Aerodyne’s 800 Size Superscale

Discussion in 'Industry News' started by HeliGods, Oct 22, 2014.

By HeliGods on Oct 22, 2014 at 8:25 AM
  1. HeliGods

    HeliGods Mark - Administrator Staff Member

    Joined:
    Mar 2, 2014
    Messages:
    832
    Likes Received:
    532
    A Mark of Beauty in every Inch!

    [​IMG]

    RC Aerodyne’s new 800 size Bell 222’s and MD500E’s are now released and available. The new True Scale helicopter puts the cockpit in the correct place for that scale look. All of the mechanics are also in the engine compartments to leave room in the front. This allows you to completely detail the helicopters to the truest scale factor you desire.

    Choices of color scheme with the MD500e comes in 4 bright colors. Red, Blue, White (not pictured) and yellow/green. The Bell 222 comes in 3 different colors. Medical Blue/White, Purple/Gold, and Yellow/Black. All of which are focused on detail, and have good visibility.

    The Super Scale series helicopters shows rivets, panel lines, air vents and much more. Pre-installed position light system is programmable with 9 different patterns. Detailed instruction manual included, and all the mechanics are completely pre-assembled right out of the box.

    Features Bell 222

    • Dual Blade Rotorhead and scale carbon fiber rotor blades included
    • Dual Tail Blade and scale carbon fiber tail blades included
    • Extremely detailed surface details, a realism unknown in this size class
    • Complete seven seated scale cockpit
    • Complete built in / pre-installed position lighting system (controllable via aux channel)
    • Special CCPM mechanics built in the top section, as on a real helicopter
    • Use of 750MX standard equipment (12S battery, 530KV motor), fly with your existing parts
    • Take off weight of 9kg
    • Product comes pre-assembled to help get you in the air.
    Features MD500E

    • 5 Bladed Rotorhead and scale carbon fiber rotor blades included.
    • 4 Bladed Tail and scale carbon fiber tail blades included.
    • Extremely detailed surface details, a realism unknown in this size class.
    • Special CCPM mechanics built in the top section, as on a real helicopter.
    • Product comes pre-assembled to help get you in the air.

    For more information on these Scale helicopter click here.




    800 MD500E factory video (6 min 23 sec)​

    Continue reading...
     

Comments

Discussion in 'Industry News' started by HeliGods, Oct 22, 2014.

    1. feral

      feral Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      2,299
      Likes Received:
      1,461
      Pretty sure austars-model.com.au has them in aus
       
    2. Ant

      Ant Guest

      Nice models. Problem is if you crash and write off the fus, you can't really use the mechanics for anything else.
       
    3. HeliGod Father

      HeliGod Father Administrator Staff Member

      Joined:
      Mar 26, 2014
      Messages:
      388
      Likes Received:
      413
      Yes very true @Ant . Most hardcore Scale enthusiasts usually keep the same heli. Most 3d pilots go through many helis and need the parts... depends what type of flying style attracts i suppose....
       

Share This Page

test

    About Us

    Just like you, Heligods staff are regular everyday fliers. Join our forum and participate in what will become the worlds greatest rc helicopter forum..

    Credits:

    A big thank you to the following people who helped us put together this site:

    Pope Francis

    Deli Lama

    George Bush

    Gene Simmons (aka Crash)