Close Sidebar
![[IMG]](http://helipilotonline.com/wp-content/uploads/2015/06/tictoc2-590x760.png)
Playing a musical instrument, beating a video game and flying a model helicopter take time and practice. These and many other tasks all have steps that you must follow to learn to play the right keys or chords, learn when to push the right buttons, or how to move the sticks in the right direction to get the result you want. It’s hard at the beginning, but success starts with knowing what to do.
Heligods - The International RC Helicopter Forum
Learn to Fly 3d RC Helicopters
http://www.thingap.com
![[IMG]](http://www.thingap.com/wp-content/uploads/2014/04/power-to-weight.png)
"ThinGap is currently developing a series of new off the shelf ring motors including a 7” outer diameter motor with 4 kW shaft power."
http://www.thingap.com/wp-content/uploads/2015/04/Thin-Gap-Brochure-2015-Web.pdf
They are discsussed on HF now:
http://www.helifreak.com/showthread.php?t=706839
I wonder if they can be used as direct main shaft power source without any gears due to relatively low kV?
Advantages:
- 7kW of power
- low weight (?)...
"ThinGap is currently developing a series of new off the shelf ring motors including a 7” outer diameter motor with 4 kW shaft power."
http://www.thingap.com/wp-content/uploads/2015/04/Thin-Gap-Brochure-2015-Web.pdf
They are discsussed on HF now:
http://www.helifreak.com/showthread.php?t=706839
I wonder if they can be used as direct main shaft power source without any gears due to relatively low kV?
Advantages:
- 7kW of power
- low weight (?)...
Vendor Notice - ZenRC
New Bk 7002hv Full Size Servos
And without further ado - Here it is. New from BK.
Available now at Zen RC.
Specs:
Operation Voltage: 6V – 8.4V
Weight: 66g (2.33 Oz)
Dimensions: 20mm x 40mm x 37mm
Frequency: 1520us/333 hz
Gear Type: Metal
Motor Type: Coreless
Torque:
17.0 kg/cm (263 oz/in) @ 6V
19.1 kg/cm (264.5 oz/in) @ 7.4V
21.1 kg/cm (292.3 oz/in) @ 8.4V
Speed:
0.070 sec/60 @ 6V
0.054 sec/60 @ 7.4V
0.047 sec/60 @ 8.4V
Available now at Zen RC.
Specs:
Operation Voltage: 6V – 8.4V
Weight: 66g (2.33 Oz)
Dimensions: 20mm x 40mm x 37mm
Frequency: 1520us/333 hz
Gear Type: Metal
Motor Type: Coreless
Torque:
17.0 kg/cm (263 oz/in) @ 6V
19.1 kg/cm (264.5 oz/in) @ 7.4V
21.1 kg/cm (292.3 oz/in) @ 8.4V
Speed:
0.070 sec/60 @ 6V
0.054 sec/60 @ 7.4V
0.047 sec/60 @ 8.4V
Secrets for the Best Performance
by Scott Trueblood
There are many misconceptions regarding gyros. I often hear “This gyro is horrible; my tail drifts.” This comment has been made about many outstanding gyros that top performing 3D pilots have demonstrated to be rock-solid. Granted, some gyros in very inexpensively designed RTF helicopters may not perform as well as top-shelf gear. However, if you are told that a Futaba GY-401 doesn’t hold the tail, that’s simply incorrect. In that case, you need to look more closely at the way the tail was initially set up....
by Scott Trueblood
There are many misconceptions regarding gyros. I often hear “This gyro is horrible; my tail drifts.” This comment has been made about many outstanding gyros that top performing 3D pilots have demonstrated to be rock-solid. Granted, some gyros in very inexpensively designed RTF helicopters may not perform as well as top-shelf gear. However, if you are told that a Futaba GY-401 doesn’t hold the tail, that’s simply incorrect. In that case, you need to look more closely at the way the tail was initially set up....
From time to time we succede to damage head of hex screw.
I removed such screw with torx:
![[IMG]](https://upload.wikimedia.org/wikipedia/commons/thumb/1/1c/Torx-Bits_T15-T20-T25-T30.jpg/1024px-Torx-Bits_T15-T20-T25-T30.jpg)
First use strong iron to heat up screw and weaken threadlock.
Use small hammer to place torx in damaged hex head.
Unscrew...
I hope this will help.
I learned about screw extractors but they are usefull for bigger screws.
![[IMG]](http://s7g3.scene7.com/is/image/ae235/?$p$&wid=281&hei=281&op_sharpen=1&layer=0&size=281,281&layer=1&size=281,281&src=ae235/18643_P)
...
I removed such screw with torx:
First use strong iron to heat up screw and weaken threadlock.
Use small hammer to place torx in damaged hex head.
Unscrew...
I hope this will help.
I learned about screw extractors but they are usefull for bigger screws.
...
selling my radio and receiver both is excellent condition,Comes in original box with charger $175
looking for advice on hv receiver options for my 14sg
are there any other options to tge r7008 that have have telemetery? and lower cost for 600 heli
are there any other options to tge r7008 that have have telemetery? and lower cost for 600 heli
3D Flying Tips
By Dave Miles
Playing a musical instrument, beating a video game and flying a model helicopter take time and practice. These and many other tasks all have steps that you must follow to learn to play the right keys or chords, learn when to push the right buttons, or how to move the sticks in the right direction to get the result you want. It’s hard at the beginning, but success starts with knowing what to do.
Basic...
Have you ever owned a helicopter that you crashed, wrote off, or sold and later thought, I want to go back to it?
I used to have a Hirobo Lepton that I wrote off during a crash, I didnt bother repairing it as the frames cost a ridiculous amount for a 425 mm bladed helicopter. So I moved on and got a Mikado xxtreme 480.
But after awhile, I have had realised, that Hirobo Lepton was awesome, there was something about it, when you told it to so something it did it and did not go off track.
Dare I say it, I liked how it flew more than how a xxtreme 480 flies.
I used to have a Hirobo Lepton that I wrote off during a crash, I didnt bother repairing it as the frames cost a ridiculous amount for a 425 mm bladed helicopter. So I moved on and got a Mikado xxtreme 480.
But after awhile, I have had realised, that Hirobo Lepton was awesome, there was something about it, when you told it to so something it did it and did not go off track.
Dare I say it, I liked how it flew more than how a xxtreme 480 flies.
Sold
Goblin 500 (bnf)
Goblin 500 BNF
Hi All up for sale is my Awesome Goblin 500
Unfortunately it has to go due to my car breaking down,Below is a list that it comes with (3 Flights old)
Servos
Cyclic-BK DS-5001HV
Tail-MKS DS760
Gyro
Mikado Mini Vbar (Comes with box and manual with info and cable)
Receiver
Futaba-R2008SB
Batteries
2X Pulse 4500mah (both 1 flight old)
1X Turningy 4500mah (1 Flight old)
few upgrades to mention are lynx swash and tail upgrades
In the pics shows you a few spares that come with the Heli like spare canopy (New) etc
This Heli is in MINT Condition
I am selling...
Hi All up for sale is my Awesome Goblin 500
Unfortunately it has to go due to my car breaking down,Below is a list that it comes with (3 Flights old)
Servos
Cyclic-BK DS-5001HV
Tail-MKS DS760
Gyro
Mikado Mini Vbar (Comes with box and manual with info and cable)
Receiver
Futaba-R2008SB
Batteries
2X Pulse 4500mah (both 1 flight old)
1X Turningy 4500mah (1 Flight old)
few upgrades to mention are lynx swash and tail upgrades
In the pics shows you a few spares that come with the Heli like spare canopy (New) etc
This Heli is in MINT Condition
I am selling...
Page 506 of 775
New Posts
Loading...
XenPorta 2 PRO
© Jason Axelrod from 8WAYRUN.COM
test
