Wanted: AU What Night Blades Are There Suitable For My Goblin 500

Discussion in 'Public Sales / Wanted' started by Rotorvated, Jul 20, 2014.

By Rotorvated on Jul 20, 2014 at 4:55 PM
  1. Rotorvated

    Rotorvated New Member

    Poor Goblin 500, I managed to dig some dirt with it. So it is not the show pony any more so it is going to cop a nice brace of LEDs and some night blades. I want some good night blades that are visible and have top / bottom orientation but most of them exceed to 500mm max length.
    Who has been successfully using night blades on a Goblin 500 and what blades are you using?
    Plenty of 520mm blades around but will that cause a problem?


    Regards Bob
     
    Rotorvated, Jul 20, 2014
    #1

Comments

Discussion in 'Public Sales / Wanted' started by Rotorvated, Jul 20, 2014.

    1. feral

      feral Well-Known Member

      520's should be ok @jockstrap runs align 520mm on his Gobby 500
       
      feral, Jul 20, 2014
      #2
    2. Rotorvated

      Rotorvated New Member

      The 520 are going to be very close to the tail. But if it works then that's great news.

      Thanks for the reply
       
      Rotorvated, Jul 21, 2014
      #3
    3. feral

      feral Well-Known Member

      It does work mate he's had it on 520's for a rew months just keep you blades tight and you should be sweet
       
      feral, Jul 21, 2014
      #4
    4. ZEN RC

      ZEN RC Well-Known Member

      520's will be no problems. I used 520's on mine for quite a while, when waiting for new blades to turn up. Completely stock setup and had no issues. Oddly, the new blades turned up same day the Gobby decided it wanted to stay on the ground.... a lot..... :rolleyes:
       
      ZEN RC, Jul 29, 2014
      #5
    5. jockstrap

      jockstrap Active Member

      Yep - had no problems running 520's so far on my G500..
       
      jockstrap, Jul 30, 2014
      #6

Share This Page