Gain back to 60. I finally started utilizing the bank select switch. I only have a 2-way switch, so its bank-0 for mild and bank-3 for wild. I'll...
It's definitely cyclic wobble. The cyclic gain is the only gain I've adjusted. Tail has been solid ever since I removed the friction from getting...
I've been testing with tail blades on. Tail lock has not been an issue. So far the FBL hasn't shown any anomalistic behavior except today when I...
Right. I learned that with the NanoCPx- it acted all kinds of weird if the blades were out or the F-spindle was bent. The 450 blades seem to be in...
Aaaaah! I finally got to fly out in some open air. I should go back to my base settings, I kicked the cyclic gain up a bit and now I have a slight...
More flying, more sim time, more learning- Less crashing. It's that simple. ;)
More reading from RCG: http://www.rcgroups.com/forums/showthread.php?t=2164243 From what I can tell, the stabilizer units are geared more toward...
Agreed. I learned quite a bit about the recommended clone upgrades from following Utrinque...... who I still follow on RCG.... and I learn alot...
Back in the air. :D It was a belt that I was waiting on. None of the shops keep belts in stock here. I see a big difference in quality from the...
I don't know if it was weather related or what, but after a 3-day delay, the last of my parts are in. Now I can get the 450 up and running today.
It's pretty easy. The software pretty much walks you through the setup procedure.
...... Here's the link to LemonRx http://www.lemon-rx.com/shop/
They are most likely cloned OrangeRx or something similar. I'm running LemonRx Satellite, and so far no problems. I will be ordering another one...
Too late. Preventative measures already taken. :p
Complexity of repair isn't much of an issue with me. I'm several "generations" behind still being fairly new to the Heli world. I'll make use of...
Oh, SNAP! They already did it. (didn't see it before) :confused:[ATTACH] Never mind. :p
Afterthought: even one guide pulley on the slack side of the belt would work with proper placement.
Right.... I've heard you speak highly of it before. I can see what you mean about the belt and big motors. Why they didn't design in the same type...
Since I'm sitting here still waiting on parts...... My curiosity led me to finally get a good look at a Mini Protos on the MSH site. ...... Wow. I...
I like the belt driven primary drive. Nice and quiet!
Separate names with a comma.
