I have this original CopterX 450-SE from 6years ago back in the air after hanging from the ceiling by it's tail for a few years. I've been busy...
I haven't been here in some time. I hope everyone is doing well. I've been building multi-rotors (and Planks) this year, mainly because a "drone"...
..... I have successfully done this once with a V-Bar Mini clone when it was fully functional, till @Crash Heligod rendered it impaired, and still...
FPV gear installed on the Mini as of last night, and seems to be working properly. I need a few successful ground and low altitude tests yet. If...
Oops..... I just got my hands on some FPV gear so go with the micro camera that I'm already using. 5.4gHz Tx, compatible Rx/screen combo that...
Pontoons removed, point proven, don't like the weight Camera relocated back to undercarriage. 1300Kv motor working perfectly. 3S power test, 13...
As if fate had intended, I stumbled upon some 4mm hardened rod stock in the form of an old broken screwdriver. With some creative engineering, I...
I'm going for around 2300 to 2500. Current ratio is capable of around 3500 at 100% throttle. I'm running +40% throttle curve as of last...
This bird is back in the air. I finally killed the plank I'd been flying daily for the last month, so I decided to take a break and go back to...
Hey, Bone Bag....... Here's a good one for you to "enjoy".:rolleyes: [MEDIA]
I'm still flying 2 of these Blade birdsbirds, the 120sr and the mSRx. The 120sr is awkward due to its susceptibility to porpous effect when any...
Nice! That Sport looks like the same frame as my Cx450Cx450, canopy and all.... in original form. I'm about to re-fit my Protos as well. Going to...
Ah, the cargo hook...... (thinking)...... That will have to be deployed on the B4503D of course. It's an old beater heli, but it still makes good...
I've been off hobby for quite some time due to personal issues, and that one incident that took out the Protos finished me off for awhile. I...
I'm back, you boney bas#@rd! You had me off hobby when you took out my Protos. Resurrections in progress...... You're going down, sucker! :cool:
Not "scale models" but I fly helis from sub-mini to 450 size. To my knowledge, models are rated either on motor or blade size. Actual "scale...
Right... when flying, amperage is greater. My charger actually regulates from 1 Amp down to 0.1 Amp at end of cycle, same with charge cycles.......
I been avoiding the discharge cycle on my charger, it takes the voltage down to 3.0 volts per cell.... is that normal?? It's one of those cheaper...
Okay.... I tried to keep my 7 or so packs at "storage" voltage..... but damn if most of them seem to be lacking of capacity. What is the best way...
Separate names with a comma.
