News Oxy Heli

Discussion in 'Industry News' started by Richard Knapp, Oct 21, 2017.

By Richard Knapp on Oct 21, 2017 at 7:47 AM
  1. Richard Knapp

    Richard Knapp Active Member

    Joined:
    Sep 21, 2016
    Messages:
    179
    Likes Received:
    72
    Luca:
    Something new come assembly in my desk!! And is not the 2!!

    [​IMG]
     

Comments

Discussion in 'Industry News' started by Richard Knapp, Oct 21, 2017.

    1. smakmeharder

      smakmeharder Administrator

      Joined:
      Mar 3, 2014
      Messages:
      4,825
      Likes Received:
      3,095
      Hmmmmm. I wonder what it could be! I like the over/under pitch control fork- cant see the pitch control leaver from this position so i am not sure where the pushrod is. Why is the pully on what appears to be the back of the helicopter?
       
    2. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      If you look at the belt. The heli is nose right.
      Tensioner is belt eatery to the boom.
       
    3. smakmeharder

      smakmeharder Administrator

      Joined:
      Mar 3, 2014
      Messages:
      4,825
      Likes Received:
      3,095
      AHHH i was looking from the wrong angle... now i see! I like the idea of the pully next to the tail gear because in theory you can run the belt looser for less friction overall.
       
    4. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      On site now
      OXY2 - 210 FACTORY EDITION
      [​IMG]
       
    5. ChopDrifter

      ChopDrifter Member

      Joined:
      Sep 3, 2017
      Messages:
      33
      Likes Received:
      7
    6. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      SP-OXY2-108 - OXY2 Canopy Schema #3

      [​IMG]
       
    7. ChopDrifter

      ChopDrifter Member

      Joined:
      Sep 3, 2017
      Messages:
      33
      Likes Received:
      7
      personal taste I guess, but I like this blue canopy scheme
       
    8. Mat

      Mat New Member

      Joined:
      Jun 1, 2016
      Messages:
      4
      Likes Received:
      1
      Please give us more O4 pics, and oh I hope schema 3 canopy will also be available with it. Spot on
       
    9. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      I will as I get them.
       
    10. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      NEW LOWER price.

      OXY3-255 - Oxy 3 Helicopter Kit 255 mm Main Blade
      Price : $204.25
       
    11. Mat

      Mat New Member

      Joined:
      Jun 1, 2016
      Messages:
      4
      Likes Received:
      1
      Awesome pricing, and thanks Rich for the photo updates. Any rough estimate yet on release, i.e. Before Christmas?
       
    12. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Dear OXY 2 pilots:

      I would like to explain why we made the straight main gear for oxy 2.


      The most important thing is to explain that are related to oxy 2 190 Sport.

      Main gears are not slant and are not CNC.

      They are injected mold to reduce cost. This is why they are a straight instead of slant.


      Now

      The Sport main gear can also use on any FE with the straight cut pinions.


      Because any FE as upgraded kit, it has the upgrades CNC slant main gear as Std.

      If people are looking for a low-cost solution to fly any OXY 2 FE. They can use the injected one on the FE they just need change the pinion to a straight cut.


      Also about pinion we now made things easier.

      We decided to make bag set of pinions with the common similar sizes.

      Now we have slant and straight in both the 2 and 2.5 mm.

      Now available.


      The pinion with 2 mm shaft are released for higher kv motor.

      Than we made the pinion options with 1 tooth difference.


      The ones with 2.5 mm motor shaft are related to lower kv motor and we had no need to have all different number tooth.

      We tested and there is no need have them all.

      That why we offer some tooth for 2.5 mm shaft but not all.

      We offer the 2.5 mm shaft in 2 tooth difference that is ok.


      Thank you.


      Luca.
       
    13. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      The OXY 2 190 FE is out now along with the canopy's posted.
      The Sport will be out withing the month.
       
    14. Beaver

      Beaver Well-Known Member

      Joined:
      Oct 22, 2014
      Messages:
      2,219
      Likes Received:
      996
      Ah! Nice photo. That arrangement definitely increases the tooth contact around the tail pulley..... reminds me of my Mini Protos with the larger diameter tail shaft pulley. :D
       
    15. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
       
    16. ChopDrifter

      ChopDrifter Member

      Joined:
      Sep 3, 2017
      Messages:
      33
      Likes Received:
      7
    17. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Per Luca:
      "Hei Folk.. after long silence I am here to speach.. hahhah
      I want share with you some important and exhiting news.
      I am in Saigon airport waiting some top european pilots that will stay here with me and my family.
      Main purpose of this trip is OXY 4 final Test.. and for sure some good relax!

      We will collect last missing oxy4 testing data and be able to finalize this new amazing and creazy performat 450 sized OXY HELI.

      More info will follow..stay tuned

      PS. In this critical and slow turn heli busness momemt, I want, one more time, say thanks to all of you that understand, appreciate and support our job.."
       
    18. helitone

      helitone Member

      Joined:
      Nov 2, 2017
      Messages:
      51
      Likes Received:
      23
      Take your time Luca, Iron out all the bugs, I am willing to wait for a perfect Oxy4
       
    19. Beaver

      Beaver Well-Known Member

      Joined:
      Oct 22, 2014
      Messages:
      2,219
      Likes Received:
      996
      450 you say??? :D
       

Share This Page

test

    About Us

    Just like you, Heligods staff are regular everyday fliers. Join our forum and participate in what will become the worlds greatest rc helicopter forum..

    Credits:

    A big thank you to the following people who helped us put together this site:

    Pope Francis

    Deli Lama

    George Bush

    Gene Simmons (aka Crash)